Products

1)Used for building of V belt,timing belt,and poly-V belts,with two station cord tension systems controlled by two servo motor and four station feeding

2)Set the building data and Dynamic Display Controlled by PLC and touch screen .  

3)The length of the belts :600-2800mm  4)The width of the belts :600mm  

5)Cord laying speed :max300m/min  

6)Cord laying pitch :0.5-10mm  

7)The cord tension :12-100N(±1N)

1)After curing , cooling the belt sleeve

2)Tank :Stainless steel

3)Cooling two mould at the same time

4)Automatic temperature detection,cooling the water by the

5)heat exchanger and pump

6)The mould higher:1000mm

7)The mould diameter :max1000mm

The machine is consistent of Chassis,heating device ,support device pressure roller device and transmission device.

Chassis:Welded steel plate for supporting the entire device

Heating device :the heating pipe Installation inside of the heating roller ,the temperature controlled  by the temperature-controlled meter and temperature sensor .

Supper device : It is composed of fixed rubber roll and movable supporting pedestals. The supporting pedestals are driven by the cylinder which is easy to unload the sleeve.

Function :use for curing the V belts ,timing belts and poly-v belts

◎ Controlled by PLC ,the curing station (inside pressure ,outside pressure ,temperature ,and curing time .)and Dynamic Display

◎ Heating type and Heating medium:stream

◎ Working pressure :1.4MPA  design pressure :1.6MPA

◎ Sealing form:Rubber seals

◎ Working temperature :0-200℃

◎ Curing mould higher :1000mm

For demould of V-belts ,synchronous belt and poly V-belts sleeve after vulcanization ,8 clamping cylinders can advance and retreat at the same time ,the same to four clamping cylinders ,the little mould use 4 clamping cylinders, bigger mould use 8 clamping cylinders.

1.Control type :manual or automatic

3.Stripping range:600-2800MM

◎This machine is used for surface grinding various types of the whole rubber sleeve,such as synchronous belts, Poly V and Timing belt. 

◎PLC and industrial touch screen control, parameter dynamic display

◎Grinding width:   600mm ◎Grinding length：600～2800mm 

◎Precision control： ±0.06mm